Transformers 
Power Supply DC 
UPS-Systems / Buffer- / Redundancy Modules 
Intelligent Power Distribution 
Converters / Rectifiers 
Control Cabinet Power Outlets 
EMC Suppressors 
EMC Filters 
Safety relay 
Relay Modules 
Optocouplers / Semiconductors 
Switches 
Active Interface Technology 
Passive Interface Technology 
Eurocard Holders / Control Modules 
Front Panel Interfaces 
Pass-through 
Lighting Elements 
Cable entry systems 
Control Cabinet Interfaces 
Control Devices 
Modular Connection Systems (Modlink Vario) 
Heavy Duty Connectors (Modlink Heavy) 
With open ended wires 
Connection cables 
Y connector 
Valve Connectors 
Field-wireable 
T-coupler 
Flange Connectors 
Tool 
Bulk cable 
Adapter 
Accessories 
Cube67 
Cube20 
Cube20S 
MVK Metal 
xtremeDB 
SOLID67 
Impact67 
Impact20 
MASI 
IO-Link Devices 
Accessories 
Connectivity Solutions for Cameras 
M8 Distribution Systems 
M12 Distribution Systems 
.jpg)
MEF EMC-FILTER 1-PHASE 2-STAGE
I:2A U:250 VAC/300 VDC snap on
| Art.No.: | 10461 |
| Weight: | 0.322 kg |
| Country of origin: | IT |
| Model designation: | MEF 1/2 SY 2A T |
Description
Current: 2 A
DIN-rail mountable
Attenuation curves on request.
against symmetrical interferences
The single phase 2-stage EMC filters MEF 1/2 are used in the range 0.1...30 MHz to suppress cable carried interference on mains and control cables. The best filter performance is achieved by using short connection wires (suggestion: earth connection < 10 cm) and the largest possible diameter. The EMC filters work bi-directionally (in both directions). The filters are for demanding applications. The filters are designed for use with fixed modules. One step of the filter is always for the suppression of asymmetrical interferences (magnetically compensated suppression). The second step is, dependant on application for symmetrical or asymmetrical interferences.
DIN-rail mountable
Attenuation curves on request.
against symmetrical interferences
The single phase 2-stage EMC filters MEF 1/2 are used in the range 0.1...30 MHz to suppress cable carried interference on mains and control cables. The best filter performance is achieved by using short connection wires (suggestion: earth connection < 10 cm) and the largest possible diameter. The EMC filters work bi-directionally (in both directions). The filters are for demanding applications. The filters are designed for use with fixed modules. One step of the filter is always for the suppression of asymmetrical interferences (magnetically compensated suppression). The second step is, dependant on application for symmetrical or asymmetrical interferences.
Technical Data
General product information
| Suitable for application range | Devices with high repetition rates of switching operations, Phase angle control, Power Supply Units, after transformers, supply of universal motors |
|---|---|
| Suitable for type of fault | symmetrical interferences |
Electrical data
| Leakage current max. | 5 mA @ 250 V AC, 50 Hz |
|---|
Electrical data | Supply
| Power frequency | 50 ... 60 Hz |
|---|---|
| Operating voltage AC max. | 250 V |
| Operating voltage DC max. | 300 V |
Electrical data | Output
| Overload current | 18× (IN t) max. 0.5 ms; 1.5× (IN t) max. 1 min. (1× per hour) |
|---|
Installation
| Connection cross-section solid min. | 0,2 mm² |
|---|---|
| Connection cross-section solid max. | 6 mm² |
| Connection cross-section stranded/fine-stranded min. | 0,2 mm² |
| Connection cross-section stranded/fine-stranded max. | 4 mm² |
| AWG number solid min. | 24 |
| AWG number solid max. | 9 |
| AWG number stranded/fine stranded min. | 24 |
| AWG number stranded/fine stranded max. | 11 |
Device protection | Electrical
| Duration insulation test voltage | 2 s |
|---|---|
| Insulation test voltage L-L | 2,1 kV |
| Insulation test voltage L-N | 2,7 kV |
Mechanical data | Mounting data
| Mounting method | geschnappt |
|---|---|
| Suitable for mounting type | Mounting rail TH35, (EN 60715) |
| Height | 107 mm |
| Width | 56 mm |
| Depth | 39 mm |
Environmental characteristics | Climatic
| Climatic category (EN IEC 60068-1) | 25/085/21 |
|---|
Connection data
Connection type 1
| Connection | Screw terminals SK |
|---|---|
| Family construction form | terminal |
| Gender | female |
| Color contact carrier | green-yellow |
| No. of poles | 1 |
| PIN 1 | PE |
Connection type 2
| Connection | Screw terminals SK |
|---|---|
| Family construction form | terminal |
| Color contact carrier | gray |
| No. of poles | 2 |
| PIN 1 | L |
| PIN 2 | N |
Connection type 3
| Connection | Screw terminals SK |
|---|---|
| Family construction form | terminal |
| Color contact carrier | gray |
| No. of poles | 2 |
| PIN 1 | L' |
| PIN 2 | N' |
Commercial data
| ECLASS-6.0 | 27130806 |
|---|---|
| ECLASS-6.1 | 27420201 |
| ECLASS-7.0 | 27420290 |
| ECLASS-8.0 | 27420290 |
| ECLASS-9.0 | 27420290 |
| ECLASS-10.1 | 27420208 |
| ECLASS-11.1 | 27420208 |
| ECLASS-12.0 | 27420208 |
| ETIM-5.0 | EC002498 |
| customs tariff number | 85363010 |
| customs tariff number | 85363010 |
| GTIN | 4048879029377 |
| GTIN | 4048879029377 |
| Packaging unit | 1 |
| Packaging unit | 1 |
Accessories
---- Screwdriver ----
