M12 male 0° X-cod. / RJ45 male 0° shielded
TPE 4x2x26AWG SF/UTP CAT6a bu UL/CSA. CMR 25m
描述
Ethernet CAT6A
塑料外壳, 有较好的防油防化学腐蚀性能
直式公头 – 公头 直头
M12 – RJ45, 8芯
X-编码
无电缆套管
屏蔽
防护盖
Transmission properties with channel transmission up to 50 m
更多电缆长度可按需求订制.






技术数据
电缆长度 | 25 m |
---|---|
紧固扭矩 | 0,6 Nm |
安装方式 | 插入, 用螺丝拧紧 |
触点涂层 | 镀金 |
Family construction form | M12 |
螺纹 | M12 x 1 |
Gender | male |
电缆出线 | 直头 |
编码 | X |
材料触头 | 铜合金 |
材料 | PUR |
极数 | 8 |
扳手开口宽度 | SW13 |
防护类型(EN IEC 60529) | IP66K, IP67 |
安装方式 | pluggable |
Family construction form | RJ45 |
Gender | male |
电缆出线 | 直头 |
极数 | 8 |
防护类型(EN IEC 60529) | IP20 |
电气数据 | 供电
最大工作电压 DC | 60 V |
---|---|
最大工作电流 | 1,5 A |
技术参数 | 工业通讯
传输参数 | CAT6, Class EA (ISO/IEC 11801:2002), (EN 50173-1) |
---|---|
最大传输速率 | 10 GBit/s |
安装 | 引脚分配
配置 | 充分使用 |
---|
设备保护 | 电动
防护类型附加条件 | 插入, 用螺丝拧紧 |
---|---|
污染度 | 3 |
额定冲击电压 | 1 kV |
绝缘组(IEC 60664-1) | I |
技术参数 | 机械数据
波纹软管轮廓 | 无 |
---|
机械数据 | 材料数据
外壳颜色 | 黑色 |
---|---|
锁紧螺钉的涂层 | Nickeled |
螺栓连接涂层 | nickel plated |
触点支架的颜色 | 绿色 |
锁紧螺钉材料 | 压铸锌 |
Material screw connection | 压铸锌 |
环境特性 | 气候
最小工作温度 | -25 °C |
---|---|
最大工作温度 | 85 °C |
Additional condition temperature range | depending on cable quality |
Important installation notes
Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
---|---|
Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
电缆数据
电缆
wire arrangement | (橙色-白色, 橙色), (蓝白色, 蓝色), (棕色-白色, braun), (绿色-白色, 绿色) |
---|
General data | Cable
电缆标识 | S4X |
---|---|
电缆功能 | 数据 |
护套颜色 | 蓝色 |
Type of Certificate | cURus |
Structure | Cable
Amount stranding | 4 |
---|---|
Stranding | 2 wires twisted |
Amount stranding (type 2) | 1 |
Stranding (type 2) | 4 绞合连接 大约 Insulation element twisted |
镶边 | Foil |
Filler | Insulation element |
wire arrangement | (橙色-白色, 橙色), (蓝白色, 蓝色), (棕色-白色, braun), (绿色-白色, 绿色) |
Mechanical data | Cable
最大电缆长度 | 66 m |
---|---|
Cable weigth | 65,48 g/m |
材料护套 | TPE |
无成分(护套) | 无铅, 不含氟利昂 |
Outer-diameter (jacket) | 7,4 mm |
Tolerance outer diameter (sheath) | ± 5 % |
Material wire insulation | HDPE |
Amount wires | 8 |
Outer diameter insulation | 0,9 mm |
Outer diameter tolerance core insulation | ± 5 % |
Ingredient freeness wire insulation | 无铅, 不含氟利昂 |
Amount strands (wire) | 7 |
Diameter of single wires | 26 AWG |
Conductor crosssection (wire) | 26 AWG |
Material conductor wire | 铜绞线,镀锡 |
Electrical data | Cable
最大额定电压 AC | 600 V |
---|---|
电流承载能力(标准) | 符合DIN VDE 0293标准 |
最小电流负荷能力电芯 | 2 A |
Characteristic impedance | 100 Ω @ 100 MHz |
Electrical resistance line constant wire | 212 Ω/km @ 20 °C |
交流耐受电压(电芯 - 电芯) | 1,5 kV @ 2 s |
电容线常数(线 - 线) | 84850 pF/km |
工频耐受电压(电芯 - 护套) | 1,5 kV @ 2 s |
Loop resistance | 424 Ω/km |
Temperature range | Cable
最小工作温度(固定) | -40 °C |
---|---|
最大工作温度(固定) | 80 °C |
最小工作温度(移动) | -40 °C |
最大工作温度(移动) | 80 °C |
最小仓储温度 | -40 °C |
最高仓储温度 | 80 °C |
Resistances | Cable
耐燃性 | IEC 60332-2-2 | UL 1581 § 1100 FT2 | UL 1581 § 1090 |
---|---|
chemical resistance | 顺利接受应用相关的测试 |
耐汽油性 | 顺利接受应用相关的测试 |
Oil resistance | DIN EN 60811-404 | 顺利接受应用相关的测试 |
Installation | Cable
弯曲半径(固定型) | 4 x Outer diameter |
---|---|
弯曲半径 (运动) | 4 x Outer diameter |
弯曲循环数 (拖链) | 35 Mio. @ 25 °C |
导线距离(拖链) | 0,6 m @ 25 °C |
行驶速度(拖链) | 1,2 m/s @ 25 °C |
扭力循环次数 | 3 Mio. 25 °C |
扭转应力 | ± 270 °/m @ 25 °C |
扭力速度 | 60 循环/min 25 °C |
商业信息
ECLASS-6.0 | 27061801 |
---|---|
ECLASS-6.1 | 27060307 |
ECLASS-7.0 | 27060307 |
ECLASS-8.0 | 27060307 |
ECLASS-9.0 | 27060307 |
ECLASS-10.1 | 27060307 |
ECLASS-11.1 | 27060307 |
ECLASS-12.0 | 27060307 |
ETIM-5.0 | EC002599 |
EAN | 4048879874700 |
EAN | 4048879874700 |
包装单位 | 1 |
包装单位 | 1 |
海关税号 | 85444290 |
海关税号 | 85444290 |