M12 male 0° / M12 male 0° D-cod. shielded
TPE 2x2x24AWG SF/UTP CAT5e bu UL/CSA. CM 12m
描述
USA
Ethernet CAT5
耐化学腐蚀性能需相对相关应用进行测试. 更多信息需单独获取.
直式公头 – 公头 直头
M12 – M12, 4芯
D-编码
屏蔽
无电缆套管
更多电缆长度可按需求订制.
塑料外壳, 有较好的防油防化学腐蚀性能
技术数据
电缆长度 | 12 m |
---|---|
紧固扭矩 | 0,6 Nm |
安装方式 | 插入, 用螺丝拧紧 |
Family construction form | M12 |
螺纹 | M12 x 1 |
电缆出线 | 直头 |
编码 | D |
极数 | 4 |
扳手开口宽度 | SW13 |
紧固扭矩 | 0,6 Nm |
安装方式 | 插入, 用螺丝拧紧 |
Family construction form | M12 |
螺纹 | M12 x 1 |
电缆出线 | 直头 |
编码 | D |
极数 | 4 |
扳手开口宽度 | SW13 |
电气数据 | 供电
最大工作电压 DC | 60 V |
---|---|
每个触点的工作电流(UL) | 1,5 A |
每个触点的最大工作电流 | 1,5 A |
技术参数 | 工业通讯
传输参数 | CAT5, Class D (ISO/IEC 11801:2002), (EN 50173-1) |
---|---|
最大传输速率 | 100 MBit/s |
工业通讯 | 以太网功能
双工 | Full duplex |
---|
诊断
LED 状态指示灯 | 无 |
---|
安装 | 连接
Gender | male |
---|
设备保护 | 电动
防护类型(EN IEC 60529) | IP65, IP67, IP66K |
---|---|
防护类型附加条件 | 插入, 用螺丝拧紧 |
污染度 | 3 |
额定冲击电压 | 1,5 kV |
绝缘组(IEC 60664-1) | I |
技术参数 | 机械数据
波纹软管轮廓 | 无 |
---|
机械数据 | 材料数据
锁紧装置的涂层 | Nickeled |
---|---|
材料外壳 | PUR |
Locking material | 压铸锌 |
机械数据 | 安装日期
安装方式 | 插入, 用螺丝拧紧, 振动保护 |
---|
环境特性 | 气候
最小工作温度 | -25 °C |
---|---|
最大工作温度 | 85 °C |
Additional condition temperature range | depending on cable quality |
Important installation notes
Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
---|---|
Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
Conformity
产品标准 | DIN EN 61076-2-101 (M12) |
---|
电缆数据
General data | Cable
电缆标识 | S4U |
---|---|
护套颜色 | teal |
Type of Certificate | cURus |
Structure | Cable
Amount stranding | 2 |
---|---|
Stranding | 2 wires twisted |
Stranding (type 2) | 2 绞合连接 twisted |
电缆屏蔽(类型) | 金属无纺布 |
电缆屏蔽(覆盖) | 75 % |
镶边 | Fleece |
wire arrangement | (橙色-白色, 橙色), (绿色-白色, 绿色) |
Mechanical data | Cable
Cable weigth | 55,66 g/m |
---|---|
材料护套 | TPE |
无成分(护套) | 无铅, 不含氟利昂 |
Outer-diameter (jacket) | 6,6 mm |
Tolerance outer diameter (sheath) | ± 5 % |
Material wire insulation | HDPE |
Amount wires | 4 |
Outer diameter insulation | 1,25 mm |
Outer diameter tolerance core insulation | ± 5 % |
Shore hardness wire insulation | 65 ± 3 Shore D |
Ingredient freeness wire insulation | 无铅, 无镉, 不含氟利昂, 无卤, 不含硅 |
Amount strands (wire) | 7 |
Diameter of single wires | 22 AWG |
Conductor crosssection (wire) | 24 AWG |
Material conductor wire | 铜绞线,镀锡 |
Electrical data | Cable
最大额定电压 AC | 300 V |
---|---|
电流承载能力(标准) | 符合DIN VDE 0293标准 |
最小电流负荷能力电芯 | 4,8 A |
Electrical resistance line constant wire | 59 Ω/km @ 20 °C |
交流耐受电压(电芯 - 电芯) | 3 kV @ 60 s |
电容线常数(线 - 线) | 49000 pF/km |
工频耐受电压(电芯 - 护套) | 3 kV @ 60 s |
Temperature range | Cable
最小工作温度(固定) | -40 °C |
---|---|
最大工作温度(固定) | 80 °C |
最小工作温度(移动) | -5 °C |
最大工作温度(移动) | 70 °C |
Resistances | Cable
耐燃性 | UL 1581 § 1100 FT2 | UL 1581 § 1090 | IEC 60332-2-2 |
---|---|
chemical resistance | 顺利接受应用相关的测试 |
耐汽油性 | 顺利接受应用相关的测试 |
Oil resistance | DIN EN 60811-404 | 顺利接受应用相关的测试 |
Installation | Cable
弯曲半径(安装) | x Outer diameter |
---|---|
弯曲半径(固定型) | 7 x Outer diameter |
弯曲半径 (运动) | 12 x Outer diameter |
商业信息
ECLASS-6.0 | 27061801 |
---|---|
ECLASS-6.1 | 27060307 |
ECLASS-7.0 | 27060307 |
ECLASS-8.0 | 27060307 |
ECLASS-9.0 | 27060307 |
ECLASS-10.1 | 27060307 |
ECLASS-11.1 | 27060307 |
ECLASS-12.0 | 27060307 |
ETIM-5.0 | EC002599 |
GTIN | 4048879605915 |
包装单位 | 1 |
海关税号 | 85444290 |